(+998 94) 662 09 99;   (+998 95) 144 14 85;   (+998 95) 199 14 87

Tashkent, st. Sevinchbonu, 9

info@sbdexport.uz
(+998 94) 662 09 99;  (+998 95) 144 14 85;  (+998 95) 199 14 87
Tashkent, st. Sevinchbonu, 9

Iskroline 300

Laboratory optical emission spark spectrometer

The ISKROLINE 300 atomic emission spectrometer is a laboratory-class analytical instrument for express analysis of metals and alloys on any basis. An uncompromising approach to workmanship and instrument parameters.

Features of the Iskroline 300 spectrometer

  • Analysis of complex polybasic alloys and pure metals
  • For laboratories, industries and research centers
  • Incoming control and certification analysis
  • Rapid analysis during melting
  • Automatic brand detection
  • High accuracy and speed of analysis
  • Low detection limits
  • Highest spectral resolution
  • Wide spectral range 167 - 930 nm
  • Determination of more than 70 chemical elements (including sulfur, phosphorus and carbon)
  • The strongest analytical lines of alkaline elements are available: Li, Na, K, Rb, Cs
  • Argon digital control
  • No profiling required
  • Convenient form factor
  • Simplicity and reliability in operation
Description Specifications Metrological characteristics Dimensions

DESCRIPTION

The laboratory-class Iskroline 300 stationary emission spectrometer is designed for fast and accurate spectral analysis of metals and alloys with various bases (Fe, Al, Cu, Zn, Pb, Sn, Ni, Ti, Co, Mg).

Iskroline 300 is the flagship among spark spectrometers manufactured by ISKROLINE Group of Companies. This is an uncompromising approach to workmanship and instrument parameters. If we could make any of the nodes better - it was made better! No savings on parts. Precise manufacturing of mechanics, precision adjustment of optical assemblies and repeated stress testing of all electronic components allow us to guarantee the highest quality of device manufacturing.

What is such a device for? First of all, for solving the same tasks, which our junior spark spectrometer - Iskroline 100 or mobile spectrometer Iskroline 500 - copes with. Iskroline 300 will also fulfill all these tasks. But there are also more complex tasks with which small-sized spectrometers (regardless of the manufacturer - all small-sized spark emission spectrometers on the market) cope worse. On the one hand, this is a quantitative analysis of pure and ultra-pure metals (pure copper, aluminum, lead, etc.), and on the other hand, on the contrary, it is the determination of the chemical composition of complex and super-complex alloys. You can always consult with our specialists which spectrometer to choose for solving your specific analytical tasks. The device can also be used in research laboratories.

Any spectral lines in the range from 167 to 930 nm are available in the device, including the lines of phosphorus, sulfur, carbon, nitrogen, hydrogen, oxygen, alkaline and alkaline earth elements (lithium, sodium, potassium, rubidium, cesium, berylium, magnesium, calcium, strontium , barium). They are really any - our device captures the entire spectrum of the declared range, in contrast to a number of devices from other manufacturers, which may have "technological gaps" in "insignificant regions of the spectrum" caused by the design features of the spectral device. Also, we do not juggle numbers like many manufacturers with the spectral resolution of the device.

For example, in the descriptions of spectrometers on the Internet you can find similar words: “spectral range 175-800nm, diffraction grating 3600 lines per mm !!! Dispersion 0.6 nm / mm ... ", only for such a diffraction grating the theoretical limit of the spectral range is not higher than 550nm, and the practical limit is hardly higher than 450nm. What's the conclusion? - they are lying :) Or they do not say anything and use a diffraction grating with such a high resolution only in the initial part of the spectrum, for example 175-220nm, and above 220, they use a grating with a smaller number of grooves, and, as a result, the parameters of the device are worse there.

We honestly write: in our spectrometer the spectral resolution is from 0.007 to 0.01 nm (in the range of 167-330 nm) and from 0.02 to 0.03 nm (in the range of 330-930 nm). The characteristics of both spark spectrometers are the same instrument. They differ only in execution. Which spectrometer to buy depends solely on the nature of your work.

All devices of this series are included in the State Register of Measuring Instruments in Russia, Belarus, Kazakhstan, etc. Iskroline 300 is designed for continuous analysis of a large number of samples during working hours, requiring the operator to be constantly present near the spectrometer. Therefore, it is made in the most ergonomic form - the form of a table. For the same reason, this spectrometer also comes standard with a comfortable operator's seat. The Iskroline 300 is the best-in-class laboratory emission spectrometer in terms of price / analytical capability, with high quality workmanship and reliability.

The device consists of a spectra excitation system based on a SPARKS LCR-discharge generator, a 2S36501640 vacuum spectrograph, a registration system on 24 linear CCD detectors, systems: control, gas supply, evacuation, as well as an operator's body and seat.

SPECIFICATIONS

Concentration measurement range,% from less than 0.0001 to tens *
Relative random error (depending on the element, the value of the mass fraction and the quality of GSO),% less than 0.5 - 40
Spectrum excitation source Discharge type low voltage unipolar spark in argon atmosphere
Voltage, V 200 – 500
frequency Hz 100; 200; 300; 400
Capacitance, μF 2.2; 4.4;
Inductance, μH 40, 270, 750, 2400 (on request)
Resistance, Ohm 0.3; 0.99; 3.3
Working spectral range, nm 167 – 930
Spectral resolution, nm in the range, nm
167 – 330 0.007 – 0.01
330 – 930 0.02 – 0.03
Average inverse linear dispersion, nm / mm in the range, nm
167 – 330 0.56
330 – 930 1.8
Photodetectors (linear CCD detectors TCD1304DG, TOSHIBA), pcs 24
Duration of one frame, s 0.004 – 60
Number of frames 1 – 500
Interface USB2.0
Frame transfer mode all shots there is
average over all frames there is
Power supply (220 + 22-33) V, (50 ± 2) Hz
Power consumption, no more, W no spark 500
when a spark is burning 900
Weight, no more, kg 250

METROLOGICAL CHARACTERISTICS

S 0,00004
P 0,00001
C 0,00007
Si 0,00009
Cu 0,00002
Mg 0,00009
Ti 0,00004
W 0,00009
Nb 0,00005
Ni 0,00009
Cr 0,00004
Al 0,00001
Mo 0,00007
V 0,00006
Pb 0,0008
Sb 0,000008
Ag 0,00003
As 0,00001
Mn 0,00003

* The detection limits are calculated according to the "3σ" criterion for Fe, Cu, Al bases and were obtained using real methods under typical analysis conditions. Relative random errors in the determination of 300 mass fractions of elements on Iskroline in the GSO sets of carbon and alloy steels UG0d - UG9d and UG75 - UG79 in comparison with the requirements of GOST 18895-97 "Steel. Method of photoelectric spectral analysis"

DIMENSIONS

Dimensions of the Iskroline 300 stationary spark spectrometer (L x W x H, mm): 1100 x 1200 x 750 The minimum area required to accommodate the spectrometer: 4 sq. m.

If you have any questions, please call (+998 93) 569 48 59

Or send us a message

Your name

Your phone number

your message